简体中文
BELT WITH GUIDE
Font size:SMB

81cfc5b92de5713a.jpg


At present, this patented product is adopted for the rear conveyor belt equipment of the world's largest 125MN hydraulic double-acting aluminum extruder.

 

For some cooling beds with relatively large tonnage, due to the heavy weight of the profile, the friction force with the felt belt is also relatively large, which sometimes drives the felt belt away from the support frame below. In this case, the felt belt with guide bar is a good solution. The felt belt with guide strips produced by Telon Yida generally heat seals the guide strips on the canvas bottom belt, and then bonds the bottom belt and the felt belt together to form a complete conveyor belt. The materials of the guide bar are PVC, polyurethane, etc.

 

Also for the cooling bed with large tonnage, the felt conveyor belt with synchronous belt not only prevents the conveyor belt from deviating, but also effectively prevents the felt conveyor belt from sliding relative to the support frame, or even slipping, to ensure the normal operation on the cooling bed. The material of the synchronous belt is generally polyurethane, rubber, and rubber with steel wire reinforcement. 


Updated:2020-04-27 | Return
This article keywords: